Products
Below is the details of our products and what we offer.
Constant Humidity Controller
Since the development of one of our first products, the Constant Humidity Controller (CHC) in 1979, Harvest Installations has been supplying UK and International farmers with guaranteed drying conditions, 24hrs a day, every day.
The CHC system has a proven record of accuracy, efficiency and economy with thousands of units in use on all combinable crops and onions across thousands of stores nationwide.
With a range of sizes from 200,000 to 4,000,000 BTU/hr all using the same plate type burner head, independent burner fan and up to date electronics and controls, they have proved themselves for 40 years.
Maxi-Stirrer
Built into new high tech crop stores they offer high drying rates for all combinable crops but almost all existing crop storage buildings can be fitted with the Harvest Maxi stirrer.
Stirrers allow more airflow through the crop, allowing greater storage depths allowing more tonnes per floor area and fan units can be smaller and a lower kW rating, as airflow per tonne is greatly reduced compared with a static store.
Store Controls
The Harvest Installations Store Controller makes grain store management more efficient by centralising control of your equipment in one touchscreen system. Operators save time and effort by monitoring and adjusting drying fans, Constant Humidity Controllers, extractor fans, and Maxi-Stirrers from a single interface—no more trips to multiple sites or climbing ladders.
The integrated touchscreen provides an intuitive, colour-coded layout with real-time readings for CHC data, drying fan controls with speed control, ambient temperature data, and temperature and humidity conditions within the main air duct, as well as stirrer controls.
Tunnels and Walling
The addition of the Harvest Main Air Duct has given farmers the confidence to maximize building footprint by increasing storage depths.
Fabricated from hot rolled steel section with frame centres set to an extremely economical 1220mm, it is built to handle not only high storage loads, but in addition to accept the loads created by the action of the Harvest Maxi Stirrer.
Frames also align with most timber floor designs, and the full-length air doors ensures uninterrupted airflow under the drying floor.
Fans
We supply both centrifugal and two stage axial fans ranging from 4 hp through to 50 hp for a variety of situations.
With the increased use of temperature drying systems in bulk stores our centrifugal fans will handle air temperatures of up to 50°C without any appreciable rise in motor temperature.
G.E.V.E Gable end extraction and ventilation units consisting of 900mm diameter reversible fan unit with mounting plate and external cowl which can be supplied insulated and fitted with external silencer if required for noise sensitive areas.
Tools & Sundries
We supply tools for measuring air flow and pressure whilst drying grain.
Optimal drying is achieved by knowing you have enough air coming through the heap of crop and can be achieved using the air flow meter.
Another guide is the pressure you are putting in your duct which ensure you get enough air flow without working your drying fan too hard.